Tenda AC1200 User Manual page 25

Wait until the progress bar is complete. Log in to the web UI of the router again. Choose Status >
Internet Connection Status to check the connection status
An example of configuring WISP mode
Application scenario
Tom lives in the countryside, and it is not convenient for him to connect the nearest ISP base
station using Ethernet cables. To solve the problem, he uses an AC8 router to extend wireless
signal in his apartment, and sets the router to WISP mode to meet the requirement.
Tom's ISP provides a hotspot for internet with the information below:
SSID: ISP_A
−
WiFi password: 87654321
−
PPPoE user name: Tom
−
PPPoE password: Tom123
−
Network topology
Configuration procedure:
Step 1 Log in to the web UI of the router.
Step 2 (Optional). Set Connection Type to Dynamic IP Address, and click OK.
SSID: ISP_A
WiFi Password: 87654321
.
21
AC8