Customizing Your Wifi Name And Password - Tenda AC1200 User Manual

Parameter description
Parameter
Preferred Band
2.4 GHz Network/ 5
GHz network
WiFi Name
Security Mode
WiFi Password
Hide WiFi
6.1.2

Customizing your WiFi name and password

Step 1 Click Wireless Settings to enter the page, and locate to WiFi Name and Password module.
Step 2 Customize your WiFi name, such as Tenda WiFi.
Step 3 Set Security Mode to WPA/WPA2-PSK Mixed for better security and compatibility.
Step 4 Specify your WiFi Password, such as 123456789.
Step 5 Click OK at the bottom of the page.
Description
Used to turn on or off the Preferred Band function.
When it is enabled, the WiFi names of 2.4 GHz and 5 GHz networks are the same. And
only one WiFi signal is displayed. When you connect to the WiFi network, a better-
quality WiFi signal will be automatically connected.
Used to enable or disable the wireless networks of the router.
It specifies the wireless network name (SSID) of the WiFi network.
It specifies the encryption modes supported by the router, including:
None: It indicates that a wireless network is not encrypted and any clients can

access the network without a password. This option is not recommended as it leads
to low network security.
WPA-PSK: It indicates that WPA-PSK is adopted to authenticate users.

WPA2-PSK: It indicates that WPA2-PSK is adopted to authenticate users.

WPA/WPA2-PSK Mixed: It indicates that WPA-PSK and WPA2-PSK are adopted to

authenticate users.
Used to connect a wireless network. You are recommended to use the combination of
digits, letters and special characters for higher security.
Selecting None indicates that wireless clients can connect to the wireless network
without entering a password. Select this option only when necessary since it leads to
weak network security.
With this function enabled, wireless clients cannot detect the SSID, and you need to
manually enter the SSID on the wireless clients to access the wireless network. By
default, this function is disabled.
34