Wireless Parameters - Tenda AC1200 User Manual

6.4

Wireless parameters

In this section, you are allowed to change network mode, WiFi channel, and WiFi bandwidth of
either 2.4 GHz or 5 GHz WiFi network.
To access the configuration page, click Wireless Settings and move to Wireless Parameters
module.
Parameter description
Parameter Description
It specifies various protocols adopted for wireless transmission.
11b/g mixed: It indicates that devices compliant with IEEE 802.11b or IEEE 802.11g protocol

can connect to the router.
11b/g/n mixed: It indicates that all devices working at 2.4 GHz and compliant with IEEE

802.11b, IEEE 802.11g, or IEEE 802.11n protocol can connect to the router.
Network
Mode
11n: It indicates that devices working at 2.4 GHz and compliant with IEEE 802.11n can connect

to the router.
11ac: It indicates that devices complaint with IEEE 802.11ac protocol can connect to the router.

11a/n/ac mixed: It indicates that devices working at 5 GHz and compliant with IEEE 802.11a,

IEEE 802.11n or IEEE 802.11ac protocol can connect to the router.
It specifies the operating channel of a WiFi network.
By default, the WiFi channel is Auto, which indicates that the router selects a channel for the
WiFi
wireless network automatically. But you can change it as required. You are recommended to
Channel
choose a channel with less interference for better wireless transmission efficiency. You can use a
third-party tool to scan the WiFi signals nearby to understand the channel usage situations.
39