Tenda AC1200 User Manual page 89

Local upgrade
To enable a successful upgrade, ensure that the firmware is applicable to the router.

When you are upgrading a firmware, do not power off the router.

Step 1 Go to www.tendacn.com, download a firmware version of the router to your computer
and unzip it.
Step 2 Choose Administration, and move to the Device Management module to access the
configuration page.
Step 3 Click Local Upgrade.
Step 4 Select the corresponding firmware version, and click Open.
Step 5 Click OK in the appearing dialog box.
---End
Wait until the progress bar is complete. Log in to the web UI of the router again. Choose Status >
System Information and check whether the upgrade is successful based on Firmware Version
For better performance of the new firmware, you are recommended to reset the router to factory
default settings and re-configure the router when the upgrading completes.
Online upgrade
When the router is connected to the internet, it auto-detects whether there is a new firmware and
displays the detected information on the page. You can choose whether to upgrade to the latest
85
.