Customize The Main Wi-Fi Name; Enable Multiple Wireless Networks - Tenda N300 Wi-Fi xPON ONT User Manual

Parameter Description
You can set the intensity of the radio power of the ONT. A higher radio power brings a
Radio Power (%)
wider coverage of Wi-Fi coverage.
You can view the clients that connect to the Wi-Fi network by clicking Show Active WLAN
Clients.
⚫
⚫
Associated Clients
⚫
⚫
⚫
5.1.2

Customize the main Wi-Fi name

Step 1 Choose WLAN > Basic Settings on the web UI.
Step 2 Set SSID.
Step 3 Click Apply Changes.
*
---End
After completing the configuration, you can search the SSID(s) on your Wi-Fi-enabled devices and
connect to it to access the internet.
5.1.3

Enable multiple wireless networks

Step 1 Choose WLAN > Basic Settings on the web UI.
Step 2 Click Multiple AP. Select Enable to enable any Wi-Fi network as required, set SSID (Wi-Fi
name), and click Apply Changes.
MAC Address: It specifies the MAC address of the client connected to the Wi-Fi
network.
Tx Packets: It specifies the number of transmitted packets of the client through the Wi-
Fi network.
Rx Packets: It specifies the number of received packets of the client through the Wi-Fi
network.
Tx Rate (Mbps): It specifies the transmitting rate of the Wi-Fi network.
RSSI: It specifies the signal strength of the client received by the AP.
15
WLAN