Siemens Sinumerik 801 Technical Manual page 97

_always 5000.0
34030 REFP_MAX_CAM_DIST
mm, Maximum distance to reference cam
deg.
_always 10000.0
34040 REFP_VELO_SEARCH_MARKER
mm/min, Creep speed (encoder no.)
rev/min
_always 300.0
34050 REFP_SEARCH_MARKER_REVERSE
– Direction reversal to reference cams (encoder no.)
_always 0
34060 REFP_MAX_MARKER_DIST
mm, Maximum distance to reference mark. Max. distance to 2
deg. reference marks for distance–coded measuring systems.
_always 20.0
34070 REFP_VELO_POS
mm/min, Reference point positioning velocity
rev/min
_always 1000.0
34080 REFP_MOVE_DIST
mm, Reference point distance/target point for distance–coded
deg. system
_always –2.0
34090 REFP_MOVE_DIST_CORR
mm, Reference point offset/absolute offset distance–coded
deg.
_always 0.0
34092 REFP_CAM_SHIFT
mm, Electr. cam offset of incremental measuring systems with
deg. equidistant zero marks
_always 0.0
34100 REFP_SET_POS
mm, Reference point value/irrelevant for distance–coded
deg. system: 0 ... 3
_always 0., 0., 0., 0.
34110 REFP_CYCLE_NR
– Sequence of axes in channel–specific referencing
–1: No obligatory reference point for NC Start
0: No channel–specific reference–point approach
1–15: Sequence in channel–specific reference point
approach
SINUMERIK 801
Start-Up
0.0
0.0
0.0
***
0.0
0.0
–
–
0.0
–
Technical Appendix
plus
RESET
plus
RESET
plus
RESET
***
RESET
plus
RESET
plus
RESET
–
POWER ON
–
RESET
plus
RESET
–
RESET
DOUBLE
DOUBLE
DOUBLE
BOOLEAN
DOUBLE
DOUBLE
DOUBLE
DOUBLE
DOUBLE
DOUBLE
7-2