Siemens Sinumerik 801 Technical Manual page 74

Setting Up
5-12
DULO
[0，AX2]=0
M17
rd
3 step：Enable the leadscrew error compensation function through set MD
MD Designation
32700 ENC_COMP_ENA
BLE
Notice
When MD32700=1, the internal compensation value file in SINUMERIK 801
goes into the write protection automatically. To change a compensation value ,
first amend the compensation file and set MD32700=0 for entering the desired
value into SINUMERIK 801. Finally, reset MD32700=1.
th
4 step: Power on the system again.
Notice
The leadscrew error compensation will not be enabled until reference points
have been approached.
AX2]=0
M02
Unit Axis
- X，Z
End of the file
Example
Description
value
Compensation
0
inactive
Compensation
1
active
SINUMERIK 801
Start-Up