Symbol SPT 1700 Product Reference Manual page 85

Note: There are two different stroke shapes available for some letters. For
these letters, choose the one that's easiest for you.
Start stroke at
heavy dot
As you'll see later, you use these shapes to create both upper- and lowercase
letters.
3. Position the stylus in the left-hand side of the Graffiti writing area.
4. Start your stroke at the heavy dot, and draw the stroke shape as it displays in the
table.
Note: Don't try to draw the dot shape itself. The heavy dot is there to show
the starting point of the stroke.
5. Lift the stylus from the screen at the end of the stroke shape.
That's all there is to it! When you lift the stylus from the screen, your SPT 1700 terminal
recognizes your stroke immediately and prints the letter at the insertion point on the screen.
As soon as you lift the stylus from the screen, you can begin the stroke for the next
character you want to write.
You must make the character strokes in the Graffiti writing area or your
SPT 1700 terminal does not recognize them as text characters.
Working with Your SPT 1700 Terminal
Lift stylus here
Caution
3-9