Setting The Time - Symbol SPT 1700 Product Reference Manual

SPT 1700 Series Product Reference Guide
3. Tap the exact center of each target that displays on the screen with the tip of the
stylus.
If you need to recalibrate the screen at any time, open the Prefs application, tap on the pull-
down menu at the top right corner of the screen, and select the digitizer option.

Setting the Time

The General Preferences screen is the first screen to display after you align the digitizer on
your SPT 1700 terminal.
Note: If the General Preferences screen is not on your SPT 1700 terminal
screen, you may have pressed one of the application buttons on the
front panel. Refer to
information on displaying the General Preferences screen.
1-18
General Preferences on page 14-10 for