Record Menu - Symbol SPT 1700 Product Reference Manual

SPT 1700 Series Product Reference Guide

Record Menu

When you select the Record menu, its commands display on the screen. The menu
commands are slightly different depending on the current screen.
Address List
Delete Address Opens an alert screen prompting you to confirm deletion of the current
entry. Tap the OK button to delete the entry from your SPT 1700
terminal, or tap the Cancel button to close the alert screen and keep the
entry.
Note: By default, your SPT 1700 terminal removes the entry from the
Address Book, but retains a copy of the entry and transfers it to an
archive file on your computer the next time you perform a HotSync
operation. To remove the entry completely, clear the Save archive copy
on PC check box.
Attach Note Opens the Address Book Note screen where you can create a Note for
the current entry.
Delete Note Opens an alert screen prompting you to confirm deletion of the Note
attached to the entry. Tap the OK button to delete the Note, or tap the
Cancel button to close the alert screen and keep the note.
Beam Address Beams the current Address Book entry to another SPT 1700 terminal
through the IR port.
Beam Category Beams all Address Book entries in the current category to another SPT
1700 terminal through the IR port.
Select Business Enables you to select the current Address Book entry as your business
Card card. To beam your business card to other SPT 1700 terminals, use the
Beam Business Card command.
Beam Business Sends the current business card to another SPT 1700 terminal through
Card the IR port. You can also initiate this command by holding down the
Address Book button for at least two seconds. This is a convenient way
to exchange business cards with other SPT 1700 terminal users.
5-12
Address View