Symbol SPT 1700 Product Reference Manual page 291

To create a login script:
1. Tap the Script button in the Details screen to open the Login Script screen.
2. Tap the End pick list to open the Command list.
3. Tap the command(s) you want from the Command list.
4. If the command requires additional information, a field displays to the right of it for
you to enter the information. The following commands are available:
Wait For
Wait For
Prompt
Send
Send CR
Send User ID Transmits the User ID information entered in the User ID field of the
Send
Password
Delay
Tells your SPT 1700 terminal to wait for specific characters from the
TCP/IP server before executing the next command.
Tells your SPT 1700 terminal to wait for a prompt before executing the
next command.
Transmits specific characters to the TCP/IP server to which you are
connecting.
Transmits a carriage return or LF character to the TCP/IP server to
which you are connecting.
Network Preferences screen.
Transmits the Password entered in the Password field of the Network
Preferences screen. If you did not enter a password in the Password
field, this command prompts you to enter one. The Password
command is usually followed by a Send CR command.
Tells your SPT 1700 terminal to wait a specific number of seconds
before executing the next command in the login script.
Applications: Preferences
14-25