Calculator Menu Commands - Symbol SPT 1700 Product Reference Manual

SPT 1700 Series Product Reference Guide
Clears the entire calculation to begin a new calculation.
Toggles the current number between a negative and positive value. If
you want to enter a negative number, enter the number first and then
press the +/- button.
Places the current number into Memory. Each new number you enter
with the M+ button is added to the total already stored in memory. The
number that you add can be either a calculated value, or any number
you enter by pressing the number buttons. Pressing this button has no
effect on the current calculation (or series of calculations); it merely
places the value into memory until it is recalled.
Recalls the stored value from memory and inserts it in the current
calculation.
Removes any value stored in the Calculator memory.

Calculator Menu Commands

The Calculator supports Copy and Paste commands. You can use these commands to
copy a value from the Calculator and paste it into another application on your SPT 1700
terminal. Similarly, you can copy values from other applications on your SPT 1700 terminal,
such as Expense, and paste the values into the Calculator. For additional information on
the Copy and Paste commands, refer to
6-4
Using Menus on page 3-20.