Symbol SPT 1700 Product Reference Manual page 64

SPT 1700 Series Product Reference Guide
Setting
RF Channel
Registration Error
Shutdown
2-14
Shows the CDPD channel that is currently active. If the unit is
not registered or is searching for a channel, the value
displayed will be either "Searching A" or "Searching B",
depending on the state of the modem. Once a channel has
been detected, a numeric value for the channel is displayed.
This shows either "None" or a numeric value between 1 and
7. If "None" is displayed there was a successful registration
without any errors. If a numeric error code is displayed then an
error has occurred. Tap to display details about the error.
Turns the modem off.
Description