Using The Spt 1700; Using The Power Button/Backlight Control; Using The Contrast Control - Symbol SPT 1700 Product Reference Manual

Using the SPT 1700

This section describes the procedures for the basic use of the SPT 1700 series terminal.
Topics covered include powering on the terminal, using the backlight, adjusting the screen
contrast, writing with the stylus, and using the onscreen keyboard.

Using the Power Button/Backlight Control

The power button turns the SPT 1700 on and off. This button also serves as your backlight
control for low-light conditions. With the unit on, press and hold the power button for
approximately 2 seconds to turn the backlight on and off.
Note: When the backlight is on, the screen text displays in reverse video.

Using the Contrast Control

The contrast control button is located on the lower right-hand side of the terminal.
To adjust the contrast:
1. Press the contrast control button, which displays the contrast adjusting bar on the
terminal's screen.
2. Using your stylus, adjust the contrast by scrolling the contrast bar until the contrast
is set to the desired level, or use either of the scroll buttons on the top of the
terminal to adjust the contrast level.
3. Press the contrast control button or tap Done on the terminal screen to turn off the
contrast control.
Getting Started with the SPT 1700
Contrast
Control
1-21