Performing A Hotsync Operation Via Modem - Symbol SPT 1700 Product Reference Manual

4. Tap the check boxes to de-select the files and/or applications that you do not want
to synchronize during a modem HotSync operation. The default setting is to
synchronize all files.
Note: Applications that do not have a database (such as games) do not
synchronize — even if the item is selected in the Conduit Setup
screen.
5. Tap the OK button to close the Conduit Setup screen and activate your settings for
the next modem HotSync operation.

Performing a HotSync Operation via Modem

To perform a Modem HotSync operation:
Note: If you are not using a PalmPilot modem, you need a special modem
cable and an external modem. Connect one end of the special
modem cable to the serial connector on the SPT 1700 terminal and
the other end to the external modem. Do not attempt to use other
kinds of cables, even if they appear to be similar.
1. Tap the
2. Tap the large
synchronize the applications selected under Conduit Setup.
3. Wait for the HotSync operation to complete.
If you have any problems conducting a HotSync operation, refer to
on page 20-9.
icon to open the HotSync application.
icon to dial the Symbol Palm Terminal Desktop modem and
Applications: HotSync®
Troubleshooting
9-17