Connecting To Your Service - Symbol SPT 1700 Product Reference Manual

To use a calling card:
1. Select the Use Calling Card check box to activate this feature.
Select this box to
use a calling card
2. Enter your calling card number on the Use Calling Card line.
Note: It's a good idea to add at least three commas at the beginning of your
calling card number to compensate for the cue delay.
3. Tap OK to confirm your selection and return to the Network Preferences screen.

Connecting to Your Service

After you set your Modem and Network Preferences, establishing a connection to your ISP
or dial-in server is easy.
Remember that you need a third-party application, such as a web browser or news reader,
to take advantage of this connection. Check the Symbol website (http://www.symbol.com/
palm) for the latest information about third-party applications that support SPT TCP/IP.
To establish a connection, tap the Connect button in the Network Preferences screen to dial
the current service and display the Service Connection Progress messages.
Tip: To see expanded Service Connection Progress messages, press the lower
half of the scroll button.
To close a connection, tap the Disconnect button in the Network Preferences screen to
terminate the connection between your SPT 1700 terminal and your service.
Applications: Preferences
Enter your
calling card
number here
14-19