Symbol QRG PDT 8100 Quick Reference Manual page 31

Q u i c k
Problem
Fail to communi-
cate with IrDA
printer.
During data com-
munication, no
data was trans-
mitted, or trans-
mitted data was
incomplete.
No sound is audi-
ble.
R e f e r e n c e
Cause
Distance from
printer is more
than 1 meter (39
inches).
Obstruction inter-
fered with com-
munication.
Application is not
enabled to run
IrDA printing.
Terminal re-
moved from cra-
dle or unplugged
from host PC dur-
ing communica-
tions.
Incorrect cable
configuration.
Communication
software was in-
correctly installed
or configured.
Volume setting is
low or turned off.
29
Solution
Bring the terminal closer to the
printer and attempt communica-
tions again.
Check the path to ensure no ob-
jects were in the way.
Printer support must be included
with the application to run IrDA
printing on the terminal. See your
System Administrator.
Replace the terminal in the cradle,
or replace the Synchronization ca-
ble, and re-transmit.
See your System Administrator.
Perform setup as described in the
PDT 8100 Series with Windows
Mobile 2003 Software for Pocket
PCs Product Reference Guide.
Check the System Volume slider in
the Sounds & Reminders proper-
ties dialog box (under Start/Set-
tings) to ensure the volume is not
turned down.