15-Pin Serial Port Connector; Attaching The Trigger Handle ("Quick Grip" Compatible Terminals Only) - Symbol QRG PDT 8100 Quick Reference Manual

Q u i c k
Charging the Battery Using the Serial/Charging Cable
1. Insert the battery
charging receptacle
into the bottom of the
terminal.
2. Plug the power cable
into a wall outlet.
3. Plug the other end of
the power cable into
the battery charging re-
ceptacle.

15-Pin Serial Port Connector

To connect to the Micro-D RS-232 port at the top of the terminal, use an
ITT Cannon brand mil-spec connector (MDM-15SSB) with captivated jack
screws (mil p/n M83513/5-6) to protect the connector's contacts from
damage during insertion and removal.
Attaching the Trigger Handle
("Quick Grip" compatible terminals only)
For information about attaching and using the scanning Trigger Handle,
refer to the TRG 8100 Trigger Handle Quick Reference Guide
(p/n 72-55949-xx). Please note that the trigger handle does not ship with
the terminal.
R e f e r e n c e
Serial/Charging Cable
9
Battery charging
receptacle