Symbol QRG PDT 8100 Quick Reference Manual page 33

Q u i c k
Problem
Tapping the
screen buttons or
icons does not
activate the cor-
responding fea-
ture.
A message ap-
pears stating that
your terminal
memory is full.
Beamed data
does not trans-
mit.
R e f e r e n c e
Cause
Lower- case and
upper-case let-
ters, and numbers
written on the
wrong parts of the
LCD screen.
LCD screen not
aligned correctly.
The system is
hung.
Too many files
stored on the ter-
minal.
Too many applica-
tions installed on
the terminal.
Terminals too
close together.
Insufficient room
lighting.
31
Solution
Ensure you are writing letters and
numbers in the appropriate section
of the writing area.
Align the screen. Choose Screen/
Align Screen from the System tab
under Start/Settings, or hold down
the Function button and press the
Action button.
Soft reset the system. To perform a
soft reset, see Resetting Your Ter-
minal on page 25.
Delete unused memos and
records. You can save these
records on your computer.
If you have installed additional ap-
plications on your terminal, remove
them to recover memory. Select
Start, then Settings, and select
the System tab. Tap Remove Pro-
grams, select the unused program
and tap Remove.
Confirm that the terminals are 5"
apart, and there is a clear path be-
tween the two devices.
Adjust the room lighting or move to
a different location.