Q u i c k
Problem
Terminals with an integrated imager:
The terminal
does not save im-
ages.
Aim Target or Illu-
mination is not
available.
R e f e r e n c e
Cause
The still Image
Capture program
is not enabled.
Aim or Illumina-
tion may be
turned off.
33
Solution
Enable Image Capture.
The still Image Capture program is
application dependent. To enable
the ImageDemo application, select
ImageDemo from the Start menu.
Tap the Snap button (in Capture
mode) or press the scan trigger to
enable the ImageDemo.
Enable Aim or Illumination.
The still Image Capture program is
application dependent. To enable
the Aim and Illumination features in
the ImageDemo application, select
ImageDemo from the Start menu.
Select Capture from the Mode
menu. Tap the Aim and/or Illumina-
tion check boxes to enable.