Symbol QRG PDT 8100 Quick Reference Manual page 20

P D
w i t h
2 0 0 3
Key
Note:
1. Press Func, then another key to produce the value or function above that
key. See individual key descriptions in this table for additional Function key
usage.
2.Press Func + Ctrl + Clear to close applications.
Backlight
Caps/Shift
Clear
Cursor keys:
C, G, H, I
End
Enter/Escape
Power
Scan
Send
Space/Back-
space
Tab
T 8 1
W i n d
f o r
See Controlling the Backlight on page
Press Shift when in alpha mode, then another key to
capitalize the letter on that key.
Press Func + Shift to toggle All Caps on and off.
Press Clear to generate an Escape key. This is applica-
tion dependent but typically closes a window or clears
the screen.
Press Func + a cursor key to move the cursor up, down,
left, and right on the screen.
Press End to generate an End key. This is application
dependent but typically moves the cursor to the end of a
line
Press Enter after entering data or a command.
Press Func + Enter to generate an Escape key. This is
application dependent but typically closes a window or
clears the screen.
See Starting the Terminal on page
Press Scan to scan bar codes. (Also use right and left
scan triggers.)
The Send key is application dependent.
Press Func + Bk-Sp to enter a blank space.
Press Bk-Sp to erase information entered on the display,
one character at a time.
Press Tab to generate a Tab key. This is application de-
pendent but typically moves the cursor from field to field.
0 0 S
o w s
P o c k
Action
18
e r i e s
M o b i
e t P C
11.
10.
l e
s