Removing A Pci Slot Cover; Installing The Expansion Card - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Ê If applicable, install the slot bracket, see section
page 173.
9.4.1.2

Removing a PCI slot cover

Figure 90: Removing the PCI slot cover
Ê Fold up the PCI slot cover clamp (1).
Ê Remove the PCI slot cover (2).
V
CAUTION!
Keep the slot cover for future use. Always replace slot covers into
unused PCI slot openings to comply with applicable EMC regulations
and satisfy cooling requirements.
9.4.1.3

Installing the expansion card

I
If an optional FBU will be installed in the system, install a TFM on the
RAID controller, before proceeding.
Ê Remove the expansion card from its protective packaging.
TX1320 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing a slot bracket" on
181