Installing Additional Hdd/Ssd Modules; Concluding Steps - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
7.4.8.4

Installing additional HDD/SSD modules

Figure 71: Removing the HDD cover
Ê Press in on both release latches (1) and remove the HDD cover (2).
Ê Insert additional HDD/SSD modules, see section
HDD/SSD modules" on page
7.4.8.5

Concluding steps

Ê Install two HDD fan modules, see section
on page 167.
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 60
Ê
Ê Update the system information of your server using the Chassis ID Prom
Tool, see section
corresponding system name.
"Switching on the server" on page 63
Ê
"Performing a RAID array rebuild" on page 87
Ê
160
144.
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
"Installing 2.5-inch
"Installing the HDD fan module"
91. Select the
TX1320 M4