Stanley K1700 Installation And Operating Instructions Manual page 20

MODE
· Lighting
To select lit screen, press "set". The display starts to flash. Press the "+" or "-" key to select the time at which you want the
screen to light up, or choose "On" to keep the light on at all times. Press "ok" to confirm. Press the "+" key to go to the (Tones)
menu.
· Tones
To activate the key tone, press "set". The display starts to flash. Press the "+" or "-" key to select "On" or "Off". Press "ok" to
confirm. Press the "+" key to go to the "ºC/ºF" menu.
· Temperature stove (ºC/ºF)
To select ºC / ºF, press "set". The display starts to flash. Press the "+" or "-" key to select "ºC", "ºF" or "Auto", and then "ok" to
confirm. Press the "+" key to go to the " Pellet" (Pellet Qty) menu.
MODE
· Pellet quantity
Press "set" to see the "(Temporary settings) menu.
- Temporary settings
This feature allows you to increase or decrease by 25% the quantity of pellets at start- up. Press "set". The display starts to
flash. Press "+" or "-" to increase or decrease (between -5 to +5), accordingly. Each stove must be multiplied by 5 to obtain
the correct percentage. Press "ok" to confirm. Press the "+" key to go to the " (Power settings) menu.
MAN
esc Off Set
< Eco >
-
MAN
esc Auto Set
<
ºC / ºF >
-
MENU
OFF
OK
+
MENU
OFF
OK
+
20