Maintenance; Cleaning The Stove - Stanley K1700 Installation And Operating Instructions Manual

11 Maintenance

The Waterford Stanley boiler model pellet stove requires careful maintenance. The most important thing is to remove the ash from
the pellet burning area at regular intervals. This can be easily done by using a simple household vacuum cleaner. It should be
cleaned after burning approximately
60kg of pellets.
Note: However, before cleaning, the power of the stove must be turned off and the stove should be cold enough to prevent
accidents from occurring.

11.1 Cleaning the stove

To perform maintenance on the boiler model pellet stove, clean the airflow pipes. To do this, raise the lid on the top of the
stove (Figure 18-a) and then turn (Figure 18-b) and lift the levers inside several times (Figure 18-c) to make the dirt accumulated
inside the pipes fall out.
Figure 39 – Cleaning the turbulators
a)
c)
b)
25