Stanley K1700 Installation And Operating Instructions Manual page 21

- Power settings
This feature allows you to increase or decrease by 25% the quantity of pellets at each power level. Press "set". The display
starts to flash. Press "+" or "-" to increase or reduce (from -5 to +5), accordingly. Each stove must be multiplied by 5 to obtain
the correct percentage. Press "ok" to confirm. Press "esc" to return to the (Pellet Qty) menu and "+" to go to the (Thermostat)
menu.
· Thermostat
This feature allows you to enable or disable the room temperature thermostat. Press "set". The display starts to flash. Press
the "+" or "-" key to select "On" or "Off" and then "ok" to confirm. Press the "+" key to go to the (Pellet loading) menu.
· Pellet loading
This feature allows you to enable the worm drive to fill the channel when it is empty to keep the stove running. Press "set";
the "ok" option appears. Press "ok" to activate the drive (the " (Activated) message appears) and "esc" to stop it. Press the
"+" key to go to the (Cleaning) menu.
· Cleaning
This feature allows you to clean the burning basket manually. Press "set"; the "ok" message appears. Press "ok" to start
the cleaning; the " (Activated) message appears. When you wish to stop, press "ok". Press the "+" key to go to the (Technical)
menu.
The technical menu is not available to the end user since it includes exclusively factory settings that must never be changed.
21