Setting A Resting Step - Henny Penny FlexFusion GAS PLATINUM COMBI Series Operating Manual

Operating the unit

6.6.15 Setting a resting step

INFORMATION
Prerequisite Automatic cooking menu open
64
4. Tap the Desired injection amount field.
The Setting window is displayed.
5. Using a swipe gesture, set the rollers to the desired temperature.
Swipe up / down to increase / decrease the desired injection
amount.
6. Tap the Confirm button.
The Setting window closes.
Manual steaming is set.
The Add resting step function is available at any time.
Unless saved, the step applies only to the current cooking program.
a
b
Image: Window for adding a resting step
a Start button
Cooking program selected
1. Select the New step function.
2. Tap the Resting step field.
The Manual cooking menu appears.
3. Configure the settings.
Set the cooking mode.
Set the temperature.
Set the time.
Set the moisture.
4. Tap the "Start" button.
The Resting step is added to the current program.
The Resting step is not saved in the cooking program.
Operating instructions
b Resting step field