Siemens SINAMICS G150 Operating Instructions Manual page 221

Entering the encoder data (option K50)
Note
Entering the encoder data
If you have specified option K50 (Sensor Module SMC30), the following screen is displayed
for you to enter the encoder data.
Figure 5-24
⇒ In the Encoder name: field, enter a name of your choice.
Note
Delivery condition
The delivery condition is a bipolar HTL encoder with 1024 pulses per revolution at terminal
X521/X531.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Entering the encoder data
5.3 Procedure for commissioning with STARTER
Commissioning
221