Regency G800EC Owners & Installation Manual page 35

Faceplate - Finishing:
A 1/2" gap must be maintained on the sides of the
fireplace to allow the Face Plate to be installed and
removed.
Do NOT finish past the front face of the fireplace.
Top View
Mounting
Tab Folded
forward
Face Plate
Critical Finishing Gap
"
3
4
Framing
Nailing Flange
folded forward
Nailing Flange
Tabs folded
forward
Mounting Tabs
folded forward
Install the Face Plate by resting the arms on the
Face Plate on top of the mounting tabs.
Adjust left and right to center the Face Plate.
NOTE: Do not to touch the Face Plate without
clean, soft, gloves. Dirt or oils can be transferred
onto the finish and become permanent.
Grandview® G800EC Gas Fireplace
installation
| 35