Avaya S8800 Manual page 25

Important:
You must wait for the power-on LED to blink slowly (one flash per second) before pressing
the power button. If you press the power button while the power-on LED is blinking quickly
(three flashes per second), the server will not turn on.
1. Plug one end of the power cord into the server power supply and the other end
2. Once the power-on LED begins to blink slowly, press the power button on the front of
Next steps
See the specific product documentation for information on installing the operating system and
software.
Installing the Avaya S8800 Server for Avaya Aura
into a UPS or nonswitched outlet.
Approximately 5 seconds after the server is connected to power, one or more fans
might start running to provide cooling, and the power-on LED will blink quickly (three
flashes per second). Approximately 3 minutes after the server is connected to
power, the power-on LED will blink slowly (one flash per second), and one or more
fans might start running.
the server.
The power-on LED will stop blinking and stay lit. After you press the power button,
the server takes approximately 5 minutes to initialize.
™
Communication Manager
Turning on the server
June 2010 25