Viessmann Vitodens 200 Service Instructions Manual page 75

Fault codes
(cont.)
Display Const. Weath.-
fault comp.
code
F1 X X
F2 X X
F3 X X
F4 X X
System char- Cause
acteristics
Burner in a Flue gas
fault state temperature
limiter has
responded.
Burner in a The tem-
fault state perature lim-
iter has
responded.
Burner in a Flame signal
fault state is already
present at
burner start.
Burner in a No flame sig-
fault state nal.
Troubleshooting
Measures
Check the heating
system filling
level. Vent the
system.
Press reset but-
ton "E" after the
flue gas system
has cooled down.
Check the heating
system filling
level. Check the
circulation pump.
Vent the system.
Check the tem-
perature limiter
and connecting
cables.
Press "E".
Check the ionisa-
tion electrode and
lead.
Press "E".
Check the ionisa-
tion electrode and
lead, measure the
ionisation current,
check the gas
pressure, check
the gas combina-
tion valve, igni-
tion, ignition
module, ignition
electrodes and
the condensate
drain.
Press "E".
75