Viessmann Vitodens 200 Service Instructions Manual page 44

Coding
Code 2
(cont.)
Coding in the delivered condition
53:1 Function connection sK
of the internal exten-
sion: DHW circulation
pump
54:0 Without solar control
unit
DHW
56:0 Set DHW temperature
adjustable from 10 to
60 °C
58:0 Without auxiliary func-
tion for DHW heating
59:0 Cylinder heating:
Starting point -2.5 K
Stopping point +2.5 K
5b:0 DHW cylinder directly
connected to the boiler
60:20 During DHW heating,
the boiler water tem-
perature is max. 20 K
higher than the set
DHW temperature
44
Possible change
53:0 Function connection sK:
Central fault
53:2 Function connection sK:
External heating circuit
pump (heating circuit A1)
53:3 Function connection sK:
External cylinder primary
pump
54:1 With Vitosolic 100 (auto-
matic adjustment on con-
nection)
54:2 With Vitosolic 200 (auto-
matic adjustment on con-
nection)
56:1 Set DHW temperature
adjustable from 10 to
above 60 °C
Note
Maximum value subject
to boiler coding card
Observe the maximum
permissible DHW tem-
perature
58:10 Input of a second set
to DHW value, adjustable
58:60 from 10 to 60 °C (observe
coding addresses "56"
and "63")
59:1 Starting point adjustable
to from 1 to 10 K below the
59:10 set value
5b:1 DHW cylinder connected
downstream of the low
loss header
60:5 The difference between
to the boiler water tempera-
60:25 ture and the set DHW
temperature is adjustable
from 5 to 25 K