Detector; Avg/Vbw Type; Adc Dither - Agilent Technologies PSA Series User And Programming Manual

2.2.3.4 Optimize LO for Fast Tuning
In this mode, the LO behavior compromises phase noise at all offsets from the carrier
below approximately 2 MHz. This allows rapid measurement throughput when changing
the center frequency or span.
Key Path:
Auto Couple
Remote Command:
See "PhNoise Opt" on
Example:
FREQ:SYNT 3

2.2.4 Detector

See in Det/Demod menu.
Detector
Key Path:
Auto Couple

2.2.5 Avg/VBW Type

See in the BW/Avg menu.
Avg/VBW Type
Key Path:
Auto Couple

2.2.6 ADC Dither

Access the menu to set
Key Path:
Auto Couple
Remote Command:
[:SENSe]:ADC:DITHer[:STATe] OFF|ON|AUTO
[:SENSe]:ADC:DITHer[:STATe]?
Example:
:ADC:DITH OFF
Chapter 2
page 63.
to , , or
ADC Dither On Off
.
Auto
Instrument Functions: A - L
Auto Couple
65