Flow Tracker 2000 Leak Detector Specifications
Table 7
Leak detector specifications
Sensor type
Response time
Sensitivity
Gases
Detection
* After 7–8 minute warm-up. Recommended for gross leaks.
† Other gases are detectable but not quantifiable.
Reference Manual
Table 7
provides leak detector specifications for the Flow
Tracker 2000.
Solid-state thermal conductivity detector, low power consumption for extended battery life
*
1 second
-3
1.67 x 10
cc/sec for He, 8.3 x 10
All calibrated gases (as above) with a thermal conductivity significantly different than air
Thermal conductivity, relative conductivity, inferred leak rate, audible signal
-4
cc/sec for H
2
Flow Tracker Series 1000/2000
†
35