Trace/Detector - Agilent Technologies N1996A-503 User Reference

Mode
Meas Off (Spectrum Analyzer) Measurement

Trace/Detector

Trace/Detector
Accesses the
detection and manipulation of trace data.
Mode
Remote Command
Example
Remote Command Notes
Preset
Key Path
Select Trace
Selects which trace the
number of the desired trace is underlined.
Remote Command Notes
Preset
State Saved
Range
Key Path
Clear Write
Clear Write
Activates the
previously stored data in the selected trace and continuously displays any signals during
the sweep of the analyzer. The sweep count for
Clear Write
Because pressing
Average, Max Hold Min Hold
and
restarts and the count is reset. In general, the count is updated at the end of each trace.
Clear Write
When is pressed for one trace,
traces.
Clear Write
When in , if a measurement-related instrument setting is changed the
78
menu keys that control the acquisition, display, storage,
SA
:TRACe[1]|2|3|4:TYPE
WRITe|AVERage|MAXHold|MINHold
:TRACe[1]|2|3|4:TYPE?
TRAC:TYPE AVER
1|2|3|4 selects the trace.
Write. Only trace 1 is displayed at Preset.
Trace Detector
Trace Type
menu keys will affect. Press
No equivalent remote command.
1
The number of the selected trace is saved in Instrument State
1 | 2 | 3 | 4
Trace/Detector, Select Trace
function for the selected trace. Pressing
stops the current sweep and prepares to begin a new one,
data may be interrupted in mid-sweep and the trace
Average, Max Hold
Select Trace
Clear Write
Average, Max Hold Min Hold is reset.
and
Min Hold
and
until the
erases
restarts for all
Chapter 3