Control Assembly - Mira Discovery Installation And User Manual

Control Assembly

Important! The Yellow Lugs on the Flow
Control must be in the fully clockwise (off)
position in order to fit the Control Assembly.
Note! The Flow Control Lugs on pre 2006
models are Black.
1. Rotate the Temperature Knob fully
clockwise and carefully pull it off.
2. Remove the Grey Control Bearing.
3. Pull off the Flow Lever.
4. Remove the Flow Lever Adapter.
Important! The Lever Retainer must
not be removed.
5. Carefully unclip the Concealing Plate
from the Backplate.
Note! Use a screwdriver in the cutout to
assist separation.
6. Fit the Backplate to the Shower Control
and secure with the two Securing Screws
(removed from the Building-in Shroud).
Make sure that the Foam Seal is fully
compressed. Do not overtighten.
7. With the cutout at the bottom, locate the
Concealing Plate over the Shower
Control, engage the crosses in the
Concealing Plate with the square
recesses in the Backplate, and push
firmly until the Concealing Plate clicks
into position.
8. Align the Green Temperature Hub with
the Lever Retainer Clips as illustrated.
9. Slide the Flow Lever Adapter over the
Cartridge and onto the yellow lugs on the
Flow Control, exactly as illustrated.
10. Push the Flow Lever onto the Flow Lever
Adapter (align lugs as illustrated).
11. Push the Grey Control Bearing over the
Lever Retainer.
Note! Align the Grey Control Bearing with
the Lever Retainer Clips and not the Flow
Control Lever.
12. Refer to the section 'Commissioning',
for maximum temperature setting and
temperature knob assembly.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818
Backplate
Concealing
Plate
Grey Control Bearing
Note! If the knob does not come off, rotate it
fully anticlockwise, pull on the Temperature
Knob while slowly rotating it clockwise until it
disengages.
Flow
Lever
Adapter
Lever Retainer
Flow Lever
Clips
Grey Control Bearing
24
Flow Control
'Yellow Lugs'
Lever Retainer
Flow Lever Adapter
Flow Lever
Temperature Knob
Green Temperature Hub
Lever Retainer Clips