Mira Discovery Installation And User Manual page 23

3.8 Fit the hot and cold supply pipes and
tighten the compression nuts.
Caution! Make sure that the olives are
fitted and all pipework is flushed through
before connecting to the Shower Control.
3.9 Fit the outlet pipework, leaving enough
pipe through the wall to temporarily cap
off.
3.10 Turn on the water supplies and check for
leaks.
3.11 Fit the Shower Fittings, refer to your
Fittings Installation and User Guide for
instructions.
3.12 Fit the Concealing Plate and Control
Assembly, refer to section: 'Control
Assembly'.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818
Hot Supply
23
Outlet Pipe to
Fittings
Cold Supply