Drive Shafts Belt - Parker HMR 08 Series Assembly And Operating Instructions Manual

Modular Electric HMR Linear Drives

12.7 Drive Shafts Belt

If one of the drive shafts have to be replaced, the product key must be indicated.
Example: HMRB15CBD0-1200-000000000
To ensure that a suitable drive shaft can be delivered, the following must be known at the very least:
Drive type B = Belt
•
• Product size (15 = width 150 mm)
• Motor mounting position (BD = 090° front with double plain shaft) .
Plain shaft "P"
Double plain shaft "D"
Clamping ring
Non drive end shaft
Order numbers drive shaft belt drive
Type of drive
HMRB08xBD..., HMRB08xDD...
HMRB08xAP..., HMRB08xCP...
HMRB08xAD..., HMRB08xCD...
HMRB08xAP..., HMRB08xCP..., HMRB08xAD..., HMRB08xCD...
HMRB11xBD..., HMRB11xDD...
HMRB11xAP..., HMRB11xCP...
HMRB11xAD..., HMRB11xCD...
HMRB11xAP..., HMRB11xCP..., HMRB11xAD..., HMRB11xCD...
HMRB15xBD..., HMRB15xDD...
HMRB15xAP..., HMRB15xCP...
HMRB15xAD..., HMRB15xCD...
HMRB15xAP..., HMRB15xCP..., HMRB15xAD..., HMRB15xCD...
HMRB18xBD..., HMRB18xDD...
HMRB18xAP..., HMRB18xCP...
HMRB18xAD..., HMRB18xCD...
HMRB18xAP..., HMRB18xCP..., HMRB18xAD..., HMRB18xCD...
HMRB24xBD..., HMRB24xDD...
HMRB24xAP..., HMRB24xCP...
HMRB24xAD..., HMRB24xCD...
HMRB24xAP..., HMRB24xCP..., HMRB24xAD..., HMRB24xCD...
Bearing
Drive shaft
52
Comments
Motor mounting 090/270, double plain shaft
Motor mounting 000/180, plain shaft
Motor mounting 000/180, double plain shaft
Motor mounting 000/180, non drive end shaft
Motor mounting 090/270, double plain shaft
Motor mounting 000/180, plain shaft
Motor mounting 000/180, double plain shaft
Motor mounting 000/180, non drive end shaft
Motor mounting 090/270, double plain shaft
Motor mounting 000/180, plain shaft
Motor mounting 000/180, double plain shaft
Motor mounting 000/180, non drive end shaft
Motor mounting 090/270, double plain shaft
Motor mounting 000/180, plain shaft
Motor mounting 000/180, double plain shaft
Motor mounting 000/180, non drive end shaft
Motor mounting 090/270, double plain shaft
Motor mounting 000/180, plain shaft
Motor mounting 000/180, double plain shaft
Motor mounting 000/180, non drive end shaft
Order number
56213FIL
56214FIL
56213FIL
56215FIL
56216FIL
56217FIL
56216FIL
56218FIL
56150FIL
56151FIL
56152FIL
56153FIL
56154FIL
56155FIL
56156FIL
56157FIL
56158FIL
56159FIL
56160FIL
56161FIL