Table of Contents
Advertisement
11
Retrofit Kits
11.1 IP54 Cover
If the cover is to be completely retrofitted, the product key must be indicated.
Example: HMRS15C100-1200-000000000
Example: HMRB15CBD0-1200-000000000
To ensure that the cover and the Outer band are delivered in the correct design and length, the following must be
made known at the very least:
Drive type (S = ball screw drive / B = belt)
•
•
Product size (15 = width 150 mm)
•
Drive type (C = profile basis with ball screw and IP54 cover)
•
Carriage version: (0 = standard)
•
Order Stroke (1200 = 1200 mm)
•
Homing switch (0 = without)
•
End switch (0 = without)
•
Assembly position switch (0 = without End switch)
Inner strip guide
Clamping plate
outer band
A-band coating
Holder cover
Order numbers for the IP54 cover
Product size
HMRx08xxx0-xxxx-XXXxxxxxx
HMRx11xxx0-xxxx-XXXxxxxxx
HMRx15xxx0
HMRx18xxx0
HMRx24xxx0
HMRx08xxx1-xxxx-XXXxxxxxx, HMRx08xxx2-xxxx-XXXxxxxxx
HMRx11xxx1-xxxx-XXXxxxxxx, HMRx11xxx2-xxxx-XXXxxxxxx
HMRx15xxx1, HMRx15xxx2
HMRx18xxx1, HMRx18xxx2
HMRx24xxx1, HMRx24xxx2
Outer band
45
Sealing band
Cover
Order number
56123-XX-0...
56124-XX-0...
56100-0...
56101-0...
56102-0...
56123-XX-1...
56124-XX-1...
56100-1...
56101-1...
56102-1...
EN
Lateral
wiper
Advertisement
Table of Contents
