Position Detection Internal And External - Parker HMR 08 Series Assembly And Operating Instructions Manual

Modular Electric HMR Linear Drives

11.2 Position Detection internal and external

For connecting up to a maximum of three magnetic switches, you will require the corresponding number of M8 mount-
ed connectors.
Use, installation and connection are described in section 7.5 cont.
With the external position detection the solenoid switches are fixed in the groove of the cover profile. The IP54 cover
is required for this.
Order numbers for parts for internal position detection
Designation
M8 mounted connector
Order numbers for parts for external position detection
T-slot cable holder T-Nut, VP 5St
M8 connector with cable 5 m
M8 connector with cable 10 m
M8 connector with cable 15 m
Position detection
Magnetschalter
R2NO-I: Reed, 2-wire, normally open NO, internal
R2NC-I: Reed, 2-wire, normaly closed NC, internal
P3NO-I: PNP, 3-wire, normally open NO, internal
P3NC-I: PNP, 3-wire, normaly closed NC, internal
N3NO-I: PNP, 3-wire, normally open NO, internal
N3NC-I: PNP, 3-wire, normaly closed NC, internal
M8 - Connector
T-slot switch
Order number
54519FIL
56350FIL
KL3186
KL3217
KL3216
extern intern/extern
FL = open lead
M8 connector, snap in
0.3 m 3 m
P8S-GRSHX P8S-GRFAX
P8S-GESNX P8S-GEFFX
P8S-GPSHX P8S-GPFAX
P8S-GQSHX P8S-GQFAX
P8S-GNSHX P8S-GNFAX
P8S-GMSHX P8S-GMFAX
46
10 m
P8S-GRFDX
P8S-GEFRX
P8S-GPFDX
P8S-GQFDX
P8S-GNFDX
P8S-GMFDX