Motor And Gearbox Mounting - Parker HMR 08 Series Assembly And Operating Instructions Manual

Modular Electric HMR Linear Drives
7.7

Motor and Gearbox Mounting

Overview / exploded view of motor installation with a flange plate, using a toothed belt as an example.
Motor
Overview / exploded view of gearbox installation with two flange plates, using a spindle drive as an
example.
Motor
Motor coupling
Motor flange
Motor coupling
Gearbox
Motor flange
The motor flange usually consists of one flange plate. If the
geometric requirements are unfavorable in the assembly, the
motor flange can consist of two flange plates.
The motor flange designation always remains the same and does
not depend on whether a motor or a gearbox with motor is to be
installed on the linear drive.
Coupling housing
Coupling housing
NOTE
26
Drive shaft