Replacing The Carriage - Parker HMR 08 Series Assembly And Operating Instructions Manual

9.10 Replacing the Carriage

9.10.1 Disassembly of Carriage Ball Screw Drive
End cap drive end
► Loosen the carriage cover and the cover sheet in order to reach the screws underneath.
► Loosen the screws on the nut slot.
► Loosen the screws on the end cap drive end.
► Loosen the screws on the end cap non drive end.
End cap drive end
► Pull the cover drive out with the complete drive body.
Spindle bearing
► Remove the terminal ring for securing the spindle bearing and pull off the cover drive from the spindle
bearing.
► Remove the circlip of the floating bearing in the cover circulation and remove the bearing from the cover.
Carriage cover
Nut slot
Clamping ring
Ball screw drive
39
Cover sheet
Nut slot
Ball screw nut
EN
End cap non drive end
End cap non drive end