12.6 Carriage Belt Drive
If the carriage belt is to be replaced, the product key must be indicated.
Example: HMRB15CBD0-1200-000000000
To ensure that a suitable carriage can be delivered, the following must be known at the very least:
Drive type B = Belt
•
•
Product size (15 = width 150 mm)
•
Motor mounting position (BD = 090° front with double plain shaft)
•
Carriage: (0 = Standard)
•
Order Stroke (1200 = 1200 mm)
Runner block
Order numbers carriage belt drive
Type of drive
HMRB08xxx0..., HMRB08xxx1..., HMRB08xxx2...
HMRB11xxx0..., HMRB11xxx1..., HMRB11xxx2...
HMRB15xxx0..., HMRB15xxx1..., HMRB15xxx2...
HMRB18xxx0..., HMRB18xxx1..., HMRB18xxx2...
HMRB24xxx0..., HMRB24xxx1..., HMRB24xxx2...
For version tandem/Bipart: 2x carriage Standard necessary.
Carriage
Magnetic package
Comments
Standard/Tandem/Bipart
Standard/Tandem/Bipart
Standard/Tandem/Bipart
Standard/Tandem/Bipart
Standard/Tandem/Bipart
51
EN
Order number
56211FIL
56212FIL
56206FIL
56207FIL
56208FIL