Functions - Epson TM-T70II Technical Reference Manual

*3: Enabled only for ANK models
*4: Excluding some functions.
• For information about the TM-T70II Utility, see the TM-T70II Utility User's Manual.
• For information about how to use the memory switch setting mode, see
Setting Mode" on page
• For information about ESC/POS commands, see the ESC/POS Command Reference.

Functions

Receive buffer capacity
• 4 KB (initial setting)
• 45 bytes
BUSY condition
• Receive buffer full/Offline (initial setting)
• Receive buffer full
• In either case above, the printer enters the BUSY state after power is turned on, and when a
self-test is being run.
• If BUSY condition is set to "Receive buffer full, " the printer will not become BUSY
∗ When the cover is open
∗ When paper is fed by the Feed button
∗ When printing has stopped for a paper out
∗ When macro execution ready state
∗ When error has occurred
Processing when data receive error
• Prints "?" (initial setting)
• Ignored
Auto line feed
• Always disabled (initial setting)
• Always enabled
52.
Chapter 2 Setup
"Memory Switch
33
2