Nv Graphics Information Print Mode - Epson TM-T70II Technical Reference Manual

NV Graphics Information Print Mode

You can confirm the following information by running the NV graphics information print mode:
• Capacity of the NV graphics
• Used capacity of the NV graphics
• Unused capacity of the NV graphics
• Number of NV graphics that are registered
• Key code, number of dots in X direction, number of dots in Y direction, number of colors to be defined.
• NV graphics data
For detailed information about NV graphics, see
Follow the steps below to run this mode.
1 Close the roll paper cover.
2 While pressing the Feed button, turn on the printer. (Keep pressing the Feed button
until the printer starts printing.)
The printer starts printing current status of the printer.
With the LAN interface, before printing starts, it takes 6 seconds if the IP address is fixed and 13
seconds if the IP address is obtained with the automatic setting. (It may take longer depending
on the response time from the host.)
After the printing has been completed, press the Feed button for more than one second.
3
The printer starts printing instructions.
4 After the printing has been completed, press the Feed button.
5 Then press the Feed button for more than one second.
Turn the power off and on to return to the normal mode.
50
"NV Graphics Memory" on page 19.