Parts Name and Function
Roll paper cover
Power switch cover
Power Switch
Turns the printer on or off. The marks on the switch: (
Before turning on the printer, be sure to check that the AC adapter is connected to the
power supply.
CAUTION
Before turning the printer off, it is recommended to send a power-off command to the printer. If
you use the power-off sequence, the latest maintenance counter values are saved. (Maintenance
counter values are usually saved every two minutes.)
For detailed information about ESC/POS commands, see the ESC/POS Command Reference.
Power Switch Cover
Install the power switch cover that comes with the TM-T70II onto the printer to prevent inadvertent changing
of the power switch, to prevent tampering, and to improve the appearance of the printer.
To reset the printer when the power switch cover is installed, insert a long, thin object (such as the end of a
paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use may cause fire or shock.
WARNING
14
Manual cutter
Cover open lever
Control panel
Power switch
/
)