Epson TM-T70II Technical Reference Manual page 28

• Make sure to pull out the power cable before connecting cables.
• When connecting a customer display to the printer, connect the modular jack from the
• Set the communication conditions of the customer display as follows:
Connecting the USB interface cable
Attach the locking wire saddle at the location shown in the figure below.
1
Put the USB cable through the locking wire saddle.
2
Putting the USB cable through the locking wire saddle, as shown in the figure below, prevents the
cable from coming unplugged.
Locking wire saddle
Connect the USB cable from the host computer to the USB upstream connector.
3
28
customer display to the DM-D connector.
∗ Baud rate: 19200 bps
∗ Bit length: 8-bit
∗ Parity: no parity
∗ Stop bit: 1
TM-T70II
USB cable
AC adapter + AC cable
Modular cable
DM-D
Modular cable
Cash drawer
USB upstream connector
USB cable