Adjusting Angle Of Armpad On Parallel Sliding; Armrests; Adjusting The Width Of The Parallel Sliding - Invacare FDX User Manual

Invacare® FDX®
1.
Release the knob to adjust the armrest angle (1).
2.
Set the angle for the armrest.
3. Retighten the knob.
After adjusting the armrest height, the angle of the armpad
needs to be adjusted. Refer to 5.4.2 Adjusting angle of
armpad on parallel sliding armrests, page 32.

5.4.2 Adjusting angle of armpad on parallel sliding

armrests

• 5 mm Allen key
32
1.
Loosen screws (1).
2.
Set angle for armrest.
3. Re-tighten screws. Make sure that Nordlock washers
used are re-inserted.
5.4.3 Adjusting the width of the parallel sliding armrests
The parallel sliding armrests can be adapted to the backrest
in eight widths.
Tools:
• 4 mm Allen key
1541361-N