Setting Angle Of Foot Plate; Setting Angle And Height Of Calf Pad; Lnx Legrest; Setting The Length Of The Legrest - Invacare FDX User Manual

Invacare® FDX®

5.16.4 Setting Angle of Foot Plate

• 5/32 inch Allen key
1. Fold the foot plates up in order to access the adjusting
screws (1).
2. Set the adjusting screws using the Allen key.
3. Fold the foot plate down again.

5.16.5 Setting Angle and Height of Calf Pad

• 3/16 inch Allen key
1. Fold the calf pad forward in order to access the bolt (1).
2. Loosen the bolt using the Allen key and adjust the calf
pad to the required angle and height.
60
Fig. 5-33
Fig. 5-34
3. Retighten the bolt.
4. Fold the calf pad back.

5.17 LNX legrest

5.17.1 Setting the length of the legrest

If needed, the legrest can be pre-set to 83° or 97° instead
of 90°. Contact your Invacare provider.
• 4 mm Allen key
• 10 mm open-ended wrench
You can adjust the length of the legrests independently of
one another.
1541361-N