Front Handle - Stihl MS 650 Manual

: Remove the throttle trigger (1)
with torsion spring (2).
: Remove the torsion spring from
the throttle trigger.
Installing
1
: Fit the interlock lever (1) so that it
engages the throttle trigger (2)
when operated (arrow).
MS 650, MS 660
2
1
: When installing, make sure the
torsion spring is under the
interlock lever and engages the
notch (arrow).
: On machines with handle heating
the wires (1) from the heating
element must be in the guide
(arrow) under the interlock lever.
2
: Position the handle molding so
that its front edge (arrow)
engages the frame (1).
Reassemble all other parts in the
reverse sequence.
10.3
: Take out the screws (arrows).
1
: Take out the screws (arrows).
– Remove the front handle.
Reassemble in the reverse
sequence.
Machines with handle heating
1
– Remove the front handle with
– Check the heating element –

Front Handle

heating element – b 14.4
b 14.1
67